|
MOTOR
Motor are TEFC type with weatherproof IP55 Class F insulation.
|
|
FAN AND DRIVE
The fans can be Vee belt driven and are located on top of the
fan stack. Gear reducer is also available can be upon requested.
Airfoil-shaped blades are totally fabricated from FRP with an addition
epoxy coating for the resistance of ultra violet ray and acid rain
corrision. The hubs are of cast aluminum alloy.
|
|
FAN STACK
Fan stack are made of FRP. The special aerodynamic design as well
as the location of fan can save more energy. Furthermore, because
of the longer stack, it can discharge the hot moist air away from
the tower so as to minimize the chance of re-circulation.
|
|
 |
DRIFT ELIMINATOR
The drift eliminator prevents water droplets from escaping in the exhaust
air stream so as to ensure the drift loss to be less than 0.005% of
circulating water flow rate.
|
|
SPRAY NOZZLE
Special design spray nozzle ensures the spray of water in square
pattern evenly dirstributing on the surface of filler. |
|
CASING AND BASIN
Casing body and basin are made of FRP. It is light weight and easy
to assembly and obviates need of painting. Mild steel with hot
dip-galvanized or stainless steel made casing basin are available
upon requested.
|
|
FILLER
High performance RYOWO film type filler is the heart of the cooling tower.
The special formed PVC sheets maximize the air/water contact area and
minimize air pressure drop to assure efficient heat transfer.
|
|
AIR INLET LOUVER
Air inlet louver constructed of FRP material can prevent water splashing
out from the tower and matches the rest of tower.
|
|
ALL SUPPORTING
All supporting steel members are hot-dip galvanized to minimize
rusting and corrosion ensuring long serrvice life even in corrosive
atmosphere. The stainless hardware members are also available
upon requested.An aux. suction tank is employed and fitted
with piping flanges or sockets.
|
|
|
